ZA-12 Permanent Mold

Although more commonly recognized as a gravity casting alloy, ZA-12 can also be die cast when higher strength is required.  It has the best combination of strength adn castability of all the ZA alloys.  The cold chamber die casting process is required for this alloy due to the higher attack rate on the shot end components.

Typical Permanent Mold Cast Mechanical Properties
UTS:  ksi (MPa)Yield Strength:  ksi (MPa)Elongation:  %Hardness:  BrinellModulus of Elasticity:  psi x 10^6
45-50 (310-345)39 (269)1-389-10512.0

Typical Die Cast Physical Properties
Density:  lb/in^3 (g/cc)Melt Range:  deg F (deg C)Electrical Conduct: %IACSSpecific Heat:  BTU/lb/deg FDie Shrinkage: in/in
0.218 (6.0)710-810 (377-432)28.30.1070.0075

Chemical Analysis
 AlMgCuFePbCdSnNiZn
Ingot (ASTM B240)10.8-11.5.02-.03.5-1.2.05 max.005 max.005 max.002max-balance
Die Cast (ASTM B86)10-5-11.5.01-.03.8-1.2.075 max.006 max.006 max.003 max-balance

Recommended Downloads
 

For additional properties of ZA-12 and other zinc die casting alloys, please contact us or visit our technical library.